- General Devices - Locking Rack Slides < 318kg
- Chassis Trak CLB-305 (34-63kg/pr) Lock Out & Detach
Chassis Trak CLB-305 (34-63kg/pr) Lock Out & Detach As Standard
1. CLB-305 consists of one set of two non-handed slides.
2. All slides are supplied with special (.094” max. head height) #8-32x3/8 Phillips pan head screws and self-locking nuts for mounting one set of slides. Use only these special screws when mounting through slide member to prevent internal damage to ball retainer. If mounting to cabinet rails, see cabinet mounting section for ball bearing slides.
3. CLB-305 has a front disconnect feature and locks at full extension. For non-locking, see “order” chart.
4. Slide members are made from 14 gauge (.074) work hardened cold rolled steel.
5. Slide is designed to allow stationary section to be mounted between the cabinet mounting rails to take advantage of the .38” sliding thickness. Recommended slide length is 1.0” less than the rail setting.
6. Finish: clear zinc commercial plating.
7. Holes other than those shown may be in part at manufacture’s option.
8. Load capacity is based on one set of slides at full extension with load (center of gravity) centered between the slides and at midpointof the slide (chassis section). Load capacities have a 100% (static load) safety factor at full extension. The slides will support more than the stated capacities but are not designed to be operated at capacities greater than those stated.
9. Grease applied to ball bearing slides has a temperature range of –45ºF to +350ºF, however, due to the use of plastic guide and support balls, the slide is designed for applications not exceeding 150ºF ambient temperature.
10. Odd length slides available, see next page for dimensions - contact factory for more information.
11. Other non-standard options which are available include: special marking, special extensions, special finishes, lock-in and complete design changes per customer request. Contact factory as these options will require a special reference number to assure receipt of specified options.
All General Devices slides are manufactured to order, so please allow 5-6 weeks, unless subscribed to our stockholding programme. 3D .stp files available on request.
Our Chassis Trak slides are priced and sold per pair and not singularly. OEM discounts for scheduled orders please enquire.